Safety
1-12
2004 Nordson Corporation
A1EN−01−[XX−SAFE]−10
Other Safety Precautions
Do not use an open flame to heat hot melt system components.
Check high pressure hoses daily for signs of excessive wear, damage,
or leaks.
Never point a dispensing handgun at yourself or others.
Suspend dispensing handguns by their proper suspension point.
First Aid
If molten hot melt comes in contact with your skin:
1. Do NOT attempt to remove the molten hot melt from your skin.
2. Immediately soak the affected area in clean, cold water until the hot melt
has cooled.
3. Do NOT attempt to remove the solidified hot melt from your skin.
4. In case of severe burns, treat for shock.
5. Seek expert medical attention immediately. Give the MSDS for the hot
melt to the medical personnel providing treatment.
To Next Page
Loading...
