Installation
3-25
P/N 7105144G
2008 Nordson Corporation
VersaBlue_NW
Retrofitting a Temperature Control Board
For information on the switch settings required on the temperature control
board, refer to section Repair, Replacing Boards.
IPC Webserver
Refer to the section Operation, Operation via the IPC Webserver for
information on the connecting cable to be used.
Removing Melter
Run the melter until empty, separate all connections from the melter, and
allow the melter to cool down.
Disposing of Melter
When your Nordson product has exhausted its purpose, dispose of it
properly according to local regulations.
CAUTION: The fluorescent light for the control panel background lighting
contains mercury.
To Next Page
Loading...
