Nuova Simonelli PRONTOBAR - Page 103

2 To adjust the nozzle angle turn the two 3mm
allen screws and tighten the screws with the
nozzle correctly in place.
This is useful to reduce the flow equally in
the two nozzles.
3 Remove the cappuccino maker.
4 Remove the nozzle from above.
5 At the back are the steel strips and magnets
to hold the nozzle.
Edition 02 to 02/2014
11.5
SERVICE MANUAL
3
Fig. 261
01:12
4
Fig. 262
01:13
5
Fig. 263
01:17
2
Fig. 260