Nuova Simonelli PRONTOBAR - Heating Element Replacement

3 Insert a pipe in the drain.
4 Open the connection on top of the boiler
tank to let air in so the water can drain.
Wait for the boiler tank to empty completely.
The procedure is the same for the steam
boiler tank.
6.3 HEATING ELEMENT
To avoid losses, as well as to simplify and reduce
maintenance time, the heating element is welded
to the boiler so replacing it means changing the
whole boiler tank.
The steps are:
1 Empty the boiler.
2 Unscrew the copper pipe from the boiler
tank.
3 Remove the thermostat connections (CSA
version only).
4 Remove the solenoid expansion silicon pipe.
Edition 02 to 02/2014
6.5
SERVICE MANUAL
Fig. 147
02:40
3
Fig. 145
02:16
4
Fig. 146
02:19
2
3
4
Fig. 148
02:38