Nuova Simonelli PRONTOBAR - Setting Water Hardness

Press the VW keys to enable (YES) / deactivate
(NO) cleaning at the end of service.
The VW keys can be used to select one of the
following two functions:
Back to the main menu and to confirm the tem-
perature programmed.
The ENTER key is disabled.
12.3.5 SETTING WATER HARDNESS
It is possible to set water hardness according to
French degrees and therefore, an alarm for per-
formance of the de-scaling cycle.
t 8IFOUIFNBDIJOFEJTQMBZTUIJTNFTTBHF
Press the ENTER key to enter the function.
The display will then read as follows:
Use the V W keys to set (increase/reduce) the
water hardness parameter.
WaterHardness ° FR
!A?=H?EŃ?=PEKJ
Start Cycle?
WaterHardness ° FR
WaterHardness ° FR
00
Edition 02 to 02/2014
12.16
SERVICE MANUAL