Nuova Simonelli PRONTOBAR - Changing the Condenser

9 Use the relevant screw to adjust grinding
fineness to obtain the desired coffee quality.
5.3 CHANGING
THE CONDENSER
To access the condensers, the service engineer
will have to:
1 Switch off the machine.
2 Remove the left panel by taking out the two
screws with a Phillips head screwdriver from
the top and the two screws from the front.
To remove the condensers:
3 Disconnect the fastons.
4 Using a 13 millimetre wrench remove the
nut on the panel of the condenser and then
remove the condenser itself.
Edition 02 to 02/2014
5.4
SERVICE MANUAL
9
Fig. 129
01:17
1
Fig. 130
01:21
2
Fig. 131
01:32
3
Fig. 132
01:36