Nuova Simonelli PRONTOBAR - Performing the De-Scaling Cycle

!A?=H?EŃ?=PEKJ
Start Cycle?
Press the ENTER key to return to the main
menu and save the setting to memory.
Press the RESET key to return to the main
menu without saving the setting to memory.
The following table shows the correspondence
between the hardness setting and the number
of litres of water consumed after which the
“DE-SCALE” message appears:
Note: The “DE-SCALE” alarm will not inter-
rupt machine operation and it will be
reset as soon as the de-scaling cycle
has been completed, as will the litre
counter.
If the set value is “00” the alarm will be
disabled.
12.3.6
DE-SCALING CYCLE
An automatic de-scaling cycle is performed on
the machine's boiler tanks.
t 8IFOUIFNFTTBHF
Appears, press the ENTER key to begin the
de-scaling cycle.
OPERATION
Tank version
t #FGPSF TUBSUJOH UIF EFTDBMJOH DZDMF GJMM UIF
tank with a solution of water and de-scaling
product
Direct connection
t #FGPSFTUBSUJOHUIFEFTDBMJOHDZDMFEJTDPO-
nect the direct connection pipe, fill a con-
tainer with the solution for de-scaling and
place it at the same height of the machine.
Insert the direct connection pipe in the con-
tainer with de-scaling solution.
Water Hardness
°Fr
Water litres (gal)
1-7 1500
8-30 100
30 500
00 Alarm disabled
Edition 02 to 02/2014
12.17
SERVICE MANUAL