Nuova Simonelli PRONTOBAR - Accessing Electrical Components

8.1 HOW TO ACCESS
1 Make sure the machine is turned off. Using a
Phillips screwdriver, undo the two screws at
the top and the two screws on the front left
side panel.
2 The electrical components are:
(A) Strain relief for power cable entry point.
(B) Terminal block.
(C) Ground connection.
(D) Main switch.
Edition 02 to 02/2014
8.2
SERVICE MANUAL
1
1
1
Fig. 181
00:07
A
B
Fig. 182
00:18
c
Fig. 183
00:22
D
Fig. 184
00:23