Nuova Simonelli PRONTOBAR - Nozzle

8 To change the display, remove the 4 screws.
9 Undo the two nuts to remove the USB pro-
gramming board.
10 The micro switch connections are inside the
door.
11.2 NOZZLE
The nozzle is at the front of the machine.
1 Turn off the machine and open the door.
Edition 02 to 02/2014
11.4
SERVICE MANUAL
8
Fig. 256
00:42
Fig. 257
00:51
10
Fig. 258
01:02
1
Fig. 259
01:07