Nuova Simonelli PRONTOBAR - Autosteam Adjustment

2.3.5 AUTOSTEAM ADJUSTMENT
1 The autosteam nozzle consist of a steninless
steel outer pipe with an air inlet and a teflon
inner pipe. The probe closed to the wand is
used to warm beverages at a pre-set tem-
perature.
2-3 To adjust the size of the bubbles, screw in
the teflon pipe to increase the air and there-
by the amount of foam. Unscrew to decrease
the amount of air, reducing the foam.
2 Clockwise to reduce it.
We recommend performing this operation
while actually pouring milk.
Edition 02 to 02/2014
2.14
SERVICE MANUAL
Fig. 43
02:06
2
Fig. 44
02:16
3
Fig. 45
02:22
2
-
Fig. 42
01:38