Nuova Simonelli PRONTOBAR - Air Solenoid Valve

5 When reassembling, ensure the fittings com-
ply with the entry and exit arrows.
10.2.2 AIR SOLENOID VALVE
1 To remove the air solenoid, disconnect elec-
trical connections from the coil.
2 Remove the clip and the silicon pipe.
3 When reassembling, make sure that the
plastic ring and the L-shaped silicone pipe
enter the hole without difficulty.
Edition 02 to 02/2014
10.4
SERVICE MANUAL
OUT
IN
Fig. 242
01:06
2
Fig. 244
01:18
Fig. 243
01:13
3
Fig. 245
01:38