Nuova Simonelli PRONTOBAR - Cleaning Runners and Lubrication

4.1.3 CLEANING RUNNERS AND
LUBRICATION
1 Clean the runners with a damp cloth and
mild degresing soap; moving the chamber
up and down to remove dirt from all surface.
4 Moving the chamber up and down to remove
dirt from all surface.
2 Use a teflon spray to lubricate the guides
especially the bushings of the infusion cham-
ber and then clean with dry cloth. Lubricate
the worm near the infusion chamber bushing
with teflon spray.
3 Use NUOVA SIMONELLI silicon lubricants
on the screw worm bearings.
Edition 02 to 02/2014
4.8
SERVICE MANUAL
Fig. 103
00:54
Fig. 105
00:54
Fig. 104
00:54
Fig. 106