For installation, the qualified electri-
cian must fit an omnipolar switch in
accordance with the safety regula-
tions in force and with 3 (0,12) or more
mm (in) between contacts.
To avoid dangerous overheating, make
sure the supply cord is fully uncoiled.
Do not obstruct the extraction and/or
dissipator grids, especially of the cup
warmer.
Fig. 8
The user must not replace the appli-
ance supply cord. If the cord is dam-
aged, switch off the appliance and have
a qualified technician change the cord.
If no longer using the appliance, we
recommend making it inoperative;
after removing the plug from the mains
electricity, cut the power supply cable.
CAUTION
RISK OF POLLUTION
Do not dispose of the machine in
the environment: to dispose of the
machine, use an authorised centre, or
contact the manufacturer for relative
information.
Fig. 9
To ensure that the machine is properly
ventilated, place it with the ventilation
side at a distance of 15 cm (5,9 in) from
walls or other objects.
Once a machine wash cycle has been
started, do not interrupt it, as deter-
gent residues may then be left inside
the delivery group.
CAUTION
RISK OF INTOXICATION
Use the steam nozzle with care and
never place hands below the jet of
steam. Do not touch the nozzle imme-
diately after use.
Fig. 10
CAUTION
RISK OF BURNS OR SCALDING
We remind you that before carrying
out any installation, maintenance,
unloading or adjustment operations,
the qualified operator must put on
work gloves and protective footwear.
CAUTION
RISK OF CUTTING
When adding coffee beans, the
machine operator must not place his/
her hands inside the container.
Edition 02 to 02/2014
1.6
SERVICE MANUAL
To Next Page
Loading...
