Oki C9500 - Page 180

41956001TH Rev.6 180 /
Oki Data CONFIDENTIAL
6. Sensor PWB
(1) Remove the geared motor (see section 2).
(2) Unscrew the two screws 1 to remove the feed Assy 2.
(3) Remove the parts in the portion A and then in B and pull out the shaft 3 to remove the portion
C.
(4) Remove the sensor lever 4 to demount the sensor PWB 5.
Remove the portion C
Portion B
Portion A
5
2
4
1
1
3