Oki C9500 User Manual

41956001TH Rev.6 185 /
Oki Data CONFIDENTIAL
APPENDIX C C7100/7300/9300/9500 SERIES ERROR MESSAGES
1. C7100/7300/9300/9500 Series (Error messages)
(Caution) * : Raise in the factory mode only.
** : Not raise in the standard config machines.
LED
Atten
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Blink
LCD Messages
POWER OFF/ON
300:NETWORK ERROR
CLOSE COVER
310:UPPER COVER OPEN
CLOSE COVER
311:SIDE COVER OPEN
CLOSE COVER
311:SIDE COVER OPEN
CLOSE COVER
312:TRAY2 COVER OPEN
CLOSE COVER
313:TRAY3 COVER OPEN
CLOSE COVER
314:TRAY4 COVER OPEN
CLOSE COVER
315:TRAY5 COVER OPEN
CHECK FUSER UNIT
320:FUSER UNIT MISSING
POWER OFF AND WAIT FOR
A WHILE
321:MOTOR OVERHEAT
OPEN AND CLOSE COVER
323:PAPER THICK ERROR
OPEN AND CLOSE COVER
324:PAPER THICK ERROR
OPEN AND CLOSE COVER
325:PAPER THICK ERROR
OPEN AND CLOSE COVER
326:PAPER THICK ERROR
DOWNLOAD CHIP DATA
327:DENSITY CALIBRATION
CHIP ERROR
Err
Code
300
310
311
311
312
313
314
315
320
321
323
324
325
326
327
*
Description
A network error is occurring.
The cover is open.
The cover is open.(PX711)
The cover is open.(PX713)
The cover is open.
The cover is open.
The cover is open.
The cover is open.
The fuser unit is not correctly installed
Motor (Driver LSD) overheat error
A Sensor output at Medea Empty is
outside the spec.(factory mode only
raise)
The difference among Sensor outputs is
outside the spec.(factory mode only
raise)
Media detected values are outside the
spec.
Media detected values in U-Heavy
Mode are outside the spec.
Density Adjustment’s calibration chip
correction errorOmission of factory
default setting. To prevent setting
mistake.Error that does not occur at
user level.Displayed only in Factory
Mode.
LED
Ready
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Comments
Anomalies
with Media
Weight
Detection
sensor.

Oki C9500 Specifications

General

Brand	Oki
Model	C9500
Category	Printer
Language	English