Oki C9500 - Various Print Jobs with Single Printer Unit Attached with a Controller

41956001TH Rev.6 89 /
Oki Data CONFIDENTIAL
3.1.3 Various print jobs with single printer unit attached with a controller
Menu map print
Prints program version, configuration of the control unit, and other printer configuration and
setting.
Operation: (Press switch)
Without HDD : “0” → “3” → “3”
With HDD : “0” → “0” → “3” → “3”
File list print
Prints a file list stored in the HDD or Flash ROM.
Operation: (Press switch)
Without HDD : “0” → “3” → “1” → “3”
With HDD : “0” → “0” → “3” → “1” → “3”
Font list print (PCL)
Prints a font list for PCL.
Operation: (Press switch)
Without HDD : “0” → “3” → “1” → “1” → “3”
With HDD : “0” → “0” → “3” → “1” → “1” → “3”
Font list print (PS)
Prints a font list for PS.
Operation: (Press switch)
Without HDD : “0” → “3” → “1” → “1” → “1” → “3”
With HDD : “0” → “0” → “3” → “1” → “1” → “1” → “3”
Demo print
Prints a demo pattern for each subject installed in the ROM.
Operation: (Press switch)
Without HDD : “0” → “3” → “1” → “1” → “1” → “1” → “3”
With HDD : “0” → “0” → “3” → “1” → “1” → “1” → “1” → “3”
Ethernet self-diagnostic print
If an Ethernet board is installed, perform self-diagnosis by pressing the Ethernet board SW
for two seconds or longer and print the result.