Oki Teriostar LP-1030 - Page 102

102
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
System Menu
z
Save/Delete Complete Job
The parameter species if completed jobs should be saved or deleted. Select Save
when you intend to reprint the completed job with the Web functions.
<Parameter by selecting options>
n
: Default value
Delete Delete completed jobs.
n
Save Save completed jobs.
z
Optional Folder
Your printer does not use this parameter. So always set the parameter to Not
Enabled. With Enabled, the printer will not start correctly.
z
PDtF box retention period
Species the period jobs are stored in the PDtF box.
Jobs are automatically deleted when the specied period expires.
<Parameter by selecting numbers>
1 to 199 Default value: 72 hours
z
Job Display Order
Species the display order of the print job list on the panel.
<Parameter by selecting options>
n
: Default value
n
Chronological Jobs are displayed in chronological order on the print job
list screen.
Reverse Chronological Jobs are displayed in reverse chronological order on the
print job list screen.
n
Multifunction Settings
MF
z
Start Scanning
The parameter selects the scanning started:
- Automatically when an original is set; or
- With the START button pressed after an original is set.
<Parameter by selecting options>
n
: Default value
n
Original Setting Starts scanning automatically when an original is set.
Press START Starts scanning when the START button is pressed after
an original is set.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5