Oki Teriostar LP-1030 - Top Cut at Door Open

87
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Printer Engine Menu
<Parameter by selecting options>
n
: Default value
n
O Does not cut.
30 minutes Cuts the paper if the printer is not operated for 30
minutes.
1 hour Cuts the paper if the printer is not operated for 1 hour.
2 hours Cuts the paper if the printer is not operated for 2 hours.
4 hours Cuts the paper if the printer is not operated for 4 hours.
1 minute Cuts the paper if the printer is not operated for 1 minute.
5 minutes Cuts the paper if the printer is not operated for 5 minutes.
10 minutes Cuts the paper if the printer is not operated for 10
minutes.

Top Cut at Door Open
With Top Cut at Door Open, the Printer can cut the top of the roll paper
automatically when printing the rst data job after the drawer for rolls 1 and 2 is
opened or closed. The cut width is 400 mm (15.75 inches).
TIP

With this function, the top of the roll paper is cut with the printer's
cutter. Set for a clean cut on the top of the paper of the output page.
<Parameter by selecting options>
n
: Default value
n
O Does not cut the paper.
On Cuts the paper.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5