Oki Teriostar LP-1030 - Paper Parameters

111
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu

Paper Parameters
n
Size of Automatically Supplied Paper (only with HP-GL, TIFF, and CALS)
Sets the size standard of the supplied paper when the Paper Supply Mode is set to
Continuous or Optimal.
<Parameter by selecting options>
n
: Default value
n
A Series Automatically supplies A series paper.
ARCH Series Automatically supplies ARCH series paper.
ANSI Series Automatically supplies ANSI series paper.
30x42 Series Automatically supplies 30x42-inch series paper.
MAP Series Automatically supplies Map series paper.
DIN Series Automatically supplies DIN series paper.
User Dened Series Automatically supplies user dened series paper.
Note

The default value varies depending on the the Printer initialization category.
n
Paper Supply Mode
Sets the paper supply conditions for the paper to be printed on.
<Parameter by selecting options>
n
: Default value
n
Continuous The Printer prints continuously from the small roll to the large
roll when each drawing requires no clipping.
Optimal The Printer prints on the optimal roll for minimizing blank
space. When the optimal roll is not installed, the Printer
suspends the printing process, and requires the paper
replacement.
Roll 1 The Printer prints on the roll 1 paper.
Roll 2 The Printer prints on the roll 2 paper.
Note

The default value varies depending on the Printer initialization category.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5