Oki Teriostar LP-1030 - Basic Specifications

214
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Basic Specications

Printer Specications
Item
Specication/Function
LP-1030 LP-1030-MF
Printing system Electrophotographic technology (LED exposure)
Developing system Single-component type dry developing
Photoconductor type OPC
Fuser system Heat rollers
Resolution 600 dpi
Continuous printing speed
A0 (portrait): 3.7 pages/minute
A1 (portrait): 5.1 pages/minute
A1 (landscape): 6.8 pages/minute
A2 (portrait): 6.8 pages/minute
A2 (landscape): 9.0 pages/minute
A3 (portrait): 9.0 pages/minute
A3 (landscape): 9.9 pages/minute
A4 (landscape): 12.8 pages/minute
Feed mechanism, output
direction
2-stage 2-roll, front feed and front output
Paper type Plain paper, recycled paper, tracing paper, matte lm
Paper size Roll paper (width) A0/A1/A2/A3, 36"/24"/18"/12"
Warming up time 4 minutes or less
First printing A0 printing within 30 seconds
Guaranteed print area (roll
paper only)
Full area excluding blank spaces below:
- 5 mm on front end
- 5 mm on rear end
- 5 mm on both sides
Data format D-SCAN, HP-GL, HP-GL/2, HPRTL, TIFF, CALS
HDD 320 GB
Interface Ethernet (10Base-T/100Base-Tx/1000Base-T)
Network protocol TCP/IP (ftp, lpr, xpt (socket))
(1/2)
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5