43
T
Turning the Power On/O
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Powering O
Before turning o the power, make sure that the Printer is ready to receive data
(standby screen is displayed).
1
Hold down POWER on the Printer's
panel for about 1 second.
When Shutting Down is displayed,
release the button.
If a job exists, it is saved automatically.
Printing for the saved job is available
the next time the power is turned on.
After the shutdown process is completed, the power turns o.
2
Main power switch
If the Printer will not be used for a long
time, turn o the main power switch.
Press the main power switch to the side (lower
side).
Note
Always turn o the power using the POWER button on the operation panel.
Directly turning o the main switch may damage the data stored inside the
Printer.
Do not turn o the power when the REMOTE lamp is ashing.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5
To Next Page
Loading...
