Oki Teriostar LP-1030 - One-Time Password Authentication

182
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
User authentication

One-time Password Authentication
One-time password authentication is a print mode authentication function. When
print function authentication is o, this function allows the Printer to print specied
drawings only with authentication.
Print data with one-time password Password entry Print
One-time password authentication can be used under the following conditions.
- Print Authentication is set to O.
- A one-time password has been added to our ocal printer driver.
With the one-time password specied, the Printer operates as follows:
- With print function authentication (Print Authentication) set to O, any user
can print. When the printer receives a print job, the jobs are printed in the order
they are received.
- With such operation, the one-time password function is extremely useful when
printing data you do not want another user to see. Before printing such data,
set the one-time password with the authentication
sheet of the printer driver.
One-time passwords can be set freely by individual users and can also be changed
for each drawing.
Note

Set a unique one-time password so that it does not match another user’s
one-time password. Be aware that all the print data with that password will
be printed if multiple users coincidentally set the same password.
Print jobs with one-time passwords are not immediately printed when received
by the printer and printing is suspended. (Standard print jobs without one-time
passwords are printed in order.)
To print the suspended print job with that one-time password, the user who has
submitted the one-time password job can enter the one-time password on the
operation panel at a convenient time.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5