137
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
PDtF (PlotDataToFile) Parameters
The PlotDataToFile function converts plot images into TIFF or PDF les when the
images are printed with the Printer, and then saves them in the Printer's PDtF box
or a shared folder on a computer.
Up to 1000 TIFF image les can be saved in the PDtF box with a maximum capacity
of 39 GB. When this number is exceeded, les are deleted from the oldest. Files are
also deleted when the PDtF box retention period expires.
Files stored in the PDtF box can be accessed using the WEB functions or
TerioStation (exclusive application).
n
PlotDataToFile
This parameter sets the PDtF function.
<Parameter by selecting options>
n
: Default value
n
O PDtF is not performed. Printing only.
Print + image conversion PDtF is performed. Plot images are converted into TIFF
les and stored in the PDtF box when printed.
Image conversion PDtF is performed.
Plot images are converted into TIFF or PDF les and stored
in the PDtF box or a shared folder without being printed.
n
File Naming Rules 1 to 4
This parameter species the naming rules for the TIFF data les stored in the PDtF
box. The following settings are available for the naming rules 1 to 4.
<Parameter by selecting options>
n
: Default value
n
Not Specied File naming rules are not used.
Date and Time Created Uses the date and time of the data creation for the le
names.
File Name Uses the le name of the print data for the le names. Set the
host character encoding parameter to an option dierent
from Not Specied when using naming rules parameter
with a method other than the printer driver connection.
User Name Uses the login name of the user logged in the host
computer when the print data was sent for the le names.
Host Name Uses the name of the host computer from which the data
was sent for the le names.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5