Oki Teriostar LP-1030 - Replacing the Process Cartridge

6464
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Replacing the Process Cartridge
The following explains the procedure for replacing the process cartridge.

Replacement Precautions
Warning

Do not place a process cartridge into a ame. An accident or re
may result.
Note

Keep the process cartridge stored in its cardboard box. Unpack the package
only just before using it.

When handling the process cartridge, hold the handles at each end rmly
with both hands.

Handle the process cartridge carefully to prevent the photoconductor drum
surface from being scratched or damaged.

Do not touch areas other than the handles of the process cartridge.

Be sure to mount the process cartridge
cover to protect the photoconductor drum
and prevent its light deterioration. Remove
the cover only when you are installing the
process cartridge into the Printer.

Black developing toner may be adhered to
the photoconductor drum of a new process
cartridge. However, this is for maintaining the cartridge in a good condition,
so use the cartridge as is. The toner is cleaned automatically after the
cartridge is inserted into the Printer. So it does not aect the print quality.

To prevent the waste toner from being spilled, be careful not to expose the
process cartridge to strong shaking, tilting, or impacts.
Photoconductor
drum
Handles
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5