Oki Teriostar LP-1030 - Supplied Items at Printer Installation

12
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Supplied Items at Printer Installation
The Printer components and options are shown in the tables below.
If any parts are missing or damaged, contact the store of purchase or your nearest
service representative.
Printer Components Quantity Notes
Printer 1
Toner cartridge 3 For installation check
Waste toner bottle 1 Installed in the Printer
Quick Reference Guide 1
CD-ROM 1
Paper ange 4
Process cartridge 1 With 3 ozone lters
Roll paper 1
30 m each for A0, A1, and A3
For installation check
Not attached for the 120V system printers.
Original output guide
MF
2
Document table
MF
1
Original width guide
MF
2
Power cord 2
To the 200V system printers, two types of
the power cords are attached.
To the 120V system printers, no power
cord is attached as it is already mounted
and fixed to the printers.