Oki Teriostar LP-1030 - Initial Checks

186
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Initial Checks

Inspection and Check Items When Problems Occur
Before diagnosing a Printer malfunction, inspect or check the following items. Take
the appropriate action.
Symptom Inspection or Check Item Action
Power does not turn on. Connection of the power cord Connect the Printer's socket to
the outlet correctly.
Power supply to the outlet Supply power to the outlet.
The Printer does not start
or operate normally.
Lighting up of error lamps and
panel message display
Take the action specied by the
error message.
&
page 187
The Printer does not print. Connection of the interface
cable
Connect the interface cable
correctly.
Lighting up of error lamps and
panel message display (see
Note below)
Take the action specied by the
error message.
&
page 187
Paper jams occur
frequently.
Paper type Check that the set paper matches
the paper type setting. Use the
OKI Data Infotech-specied paper.
&
page 27
Paper setting condition Set correctly.
&
page 44
Obstructions in the paper path Remove the obstructions.
&
page 187
Note

If there may be a problem on the line connection between the Printer and
the computer, transmit the data to the Printer (
&
page 148), check the
error log, and then ensure that no communication warning is issued (
&
page 197).

For data errors, the error message can be printed on a part of the printout (
&
page 118).
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5