Oki Teriostar LP-1030 - Removing the Roll Paper

46
T
Replacing the Roll Paper
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Note

Use the OKI Data Infotech-specied roll paper. If your paper is not OKI Data
Infotech-specied, the image quality is not guaranteed.

Store paper in a cool, dark, and dry place
TIP

The drawer for roll 2 is also open when you open the drawer for roll 1.
the drawer for roll 1
is not opened.
the drawer for roll 2
is also opened.
When opening the drawer for roll 1When opening the drawer for roll 2

Removing the Roll Paper
1
Pull out the drawer for roll 1, or the
drawer for roll 2.
Hold the center handle with your ngers, and pull
it out towards yourself slowly.
(In the example in the gure, the drawer for roll 1
is opened.)
Note

You are recommended to open the roll
paper drawers with both hands if you
cannot open them easily.
2
Paper ange
Rewind and remove the roll paper.
Turn the paper anges in the direction shown in
the gure. Rewind the roll paper until the end of
the paper appears.
Lift up the paper anges, and remove the roll
paper.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5