Oki Teriostar LP-1030 - Replacing the Charger Unit

6060
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Replacing the Charger Unit
The following explains the procedure for replacing the charger unit.

Charger Unit Replacement Procedure
1
By pressing the POWER button on the
operation panel, turn the Printer o.
2
Put the document table in the vertical
position.
MF
3
Open the fuser unit drawer.
4
By rotating the right and left outer-
side knobs counterclockwise,
release the process cartridge
drawer's lock.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5