Oki Teriostar LP-1030 - Part Names and Functions

30
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Printer ModelMultifunction Model
(1)
(11)
(10)
(8)
(7)
(8)
(7)
(9)
(10)
(9)
(1)
(2)
(3)
(4)
(5)
(3)
(4)
(5)
(6)
(6)
Part Names and Functions
This section describes the Printer's part names, operation information, and
functions.

Front Side
(1) Operation panel
Contains the following
- Lamps and a screen to indicate the Printer
status
- Buttons to set functions. (
&
page 33)
(2) Scanner cover
MF
Open to clear an original jam. (
&
page 194)
(3) Fuser Unit Drawer
Open to:
- Replace the process cartridge; or
- Clear a paper jam near the paper outlet
(4) Latch lever
Lift to open the fuser unit drawer.
(
&
page 60,
&
page 188)
(5) Filter cover
Remove to replace a lter. (
&
page 70)
(6) Waste toner door
Open when replacing a waste toner bottle.
(
&
page 57)
(7) Drawer for roll 2
Sets the roll paper. (
&
page 46)
(8) Drawer for roll 1
Sets the roll paper. (
&
page 46)
(9) Outlet slot
Outputs paper.
(10) Paper outlet cover
Open to clear a paper jam in the cutter unit.
(
&
page 189)
(11) Document table
MF
Use to feed the original to scan.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5