Oki Teriostar LP-1030 - Toner Replacement Procedure

52
T
Replacing the Toner Cartridge
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation

Toner Replacement Procedure
Note

Before replacing the toner cartridge, make sure that the power is on and
Ready is displayed.
When the power is o, the toner amount is not detected. As such, even if the
toner cartridge is replaced correctly, the error is not canceled.

Wait until all printing jobs have nished before replacing the toner
cartridge. If replacement is performed during a printing operation, the
printing will stop, and the corresponding data may be lost.

Do not replace the toner cartridge twice consecutively.
1
Open the toner door.
2
Remove the empty toner cartridge.
Hook your ngers on the concave part of the
toner cartridge, pull the cartridge to the left
of the Printer as far as it goes, then lift up and
remove the cartridge.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5