Oki Teriostar LP-1030 - No Authentication Print Job Setting (Authentication by Port)

177
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
User authentication

No Authentication Print Job Setting (Authentication by Port)
When authenticated in print mode, with this setting the Printer prints the print jobs
sent to specied ports without user authentication.
1
Press MENU.
2
Press User Authentication Settings.
3
Press No Auth. Print Job Setting
4
Register the port that can print without
user authentication.
Up to 10 ports can be registered.
If the user authentication setting is changed, the
Printer restarts when leaving the menu mode. (
&
page 83)
Note

When Authentication by port is set to No authentication, Port settings (
&
page 104) and PDL settings (
&
page 108) are required.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5