Oki Teriostar LP-1030 - Chapter

T
Part Names and Functions
35
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
3
Resets the settings, stops a printing in progress, and changes to
power save mode.
STOP button
Press this button to stop printing in progress.
RESET button
MF
In copy mode or submission mode, press this button to reset the
settings and return to the initial mode.
POWER SAVE button
While the Printer is idling, press this button to change to power
save mode. The lamp next to the button lights up. After changing
to power save mode, the screen display turns o. To cancel the
power save mode, press POWER SAVE again.
TIP

The Printer is set to enter power save mode
automatically if no operations are performed
for a prescribed time. This time can be
changed. For more details, see
&
page 86.
4
Turns the Printer power On or O.
5
Enters the number of copies or the setting values.
Numerical keypad
Uses to enter the values.
C button
Clears the setting values.
6
Changes, enters, or cancels the setting values.
+/- button
Uses to enter the values.
Enter button
Conrms the setting values.
Cancel button
Cancels the input operation or the last scanned document when
copies are stored.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5