Oki Teriostar LP-1030 - Print Density; Humidity for Tracing Paper; Power Saving in Standby

88
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Printer Engine Menu

Print Density
Adjusts the print density.
<Parameter by selecting options>
n
: Default value
Low
Slightly Low
n
Normal
Slightly High
High

Humidity for Tracing Paper
The parameter species the print mode for tracing paper.
<Parameter by selecting options>
n
: Default value
n
Normal Species the print mode for the tracing paper printed
under the normal environmental condition.
High Humidity Species the print mode for the tracing paper printed
under the high-humidity environmental condition.

Power Saving in Standby
Congure the power-saving mode when the Printer is in standby.
<Parameter by selecting options>
n
: Default value
n
O Power saving is low, but warm-up time is short.
Medium Power saving is fairly high, but warm-up time is fairly
long.
High Power saving is high, but warm-up time is long.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5