Oki Teriostar LP-1030 - List of HP-GL and HP-GL;2 Printer Engine Printing Commands

232
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation

List of HP-GL and HP-GL/2 Printer Engine Printing Commands
The meaning of the symbols in the table is as follows.
Yes : Indicates commands supported by the Printer.
Partially : Indicates commands whose functions are partially supported by the Printer.
No : Indicates commands not supported by the Printer.
If the Printer receives any non-supported commands, it ignores them. If a command that
is not in the table is received, it results in a command error.
Category Command Function Supported
Page Information
DF Standard setting command Yes
IN Default setting command Yes
IP Scaling point setting command Yes
SC Scale command Yes
RO Coordinate system rotation command Yes
IW Window setting command Yes
PS Page size setting command Yes
IR Relative scaling point setting command Yes
BP Page information setting command Yes
QL Page quality setting command Yes
RP Reprint command No
Pen Attributes
SP Pen number selection command Yes
PC Pen color setting command Yes
PW Pen width setting command Yes
WU Pen width mode setting command Yes
LT Line type selection command Yes
UL Line type user denition Yes
LA Line end/connection type selection command Yes
NP Number of pens setting command Yes
CR Color range setting command Yes
GP Pen group specication command No
SG Pen group selection command No
Vector
Commands
PA Absolute coordinates movement command Yes
PR Relative coordinates movement command Yes
PD Pen down command Yes
PU Pen up command Yes
EA Absolute coordinates rectangle printing command Yes
ER Relative coordinates rectangle printing command Yes
AA Absolute coordinates arc printing command Yes
AR Relative coordinates arc printing command Yes
CI Circle printing command Yes
EW Fan-shaped printing command Yes
AT Absolute coordinates 3-point arc printing command Yes
RT Relative coordinates 3-point arc printing command Yes
CT Arc resolution mode selection command Yes
TL Graduation length setting command Yes
XT X axis graduation printing command Yes
YT Y axis graduation printing command Yes
PE Encryption printing command Yes
BZ Absolute coordinates Bezier printing command Yes
BR Relative coordinates Bezier printing command Yes
(1/3)
T
Command Lists
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5