Oki Teriostar LP-1030 - Printer Settings

101
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
System Menu

Printer Settings
Sets the roll sizes for the paper series used in the Printer.
n
Common Setting
z
Mode Transition Time
Sets the time until standby mode is entered if no buttons are operated.
<Parameter by selecting options>
n
: Default value
30 seconds Sets to 30 seconds.
n
1 minute Sets to 1 minute.
2 minutes Sets to 2 minutes.
3 minutes Sets to 3 minutes.
5 minutes Sets to 5 minutes.
10 minutes Sets to 10 minutes.
15 minutes Sets to 15 minutes.
z
Language
Changes the message display on the screen.
<Parameter by selecting options>
n
: Default value
n
English
Italiano Русский
日本語
Français Dutch (NL)
简体中文
Español
繁體中文
Deutsch Português
z
Unit of Length
Changes the unit of length between mm and inches.
<Parameter by selecting options>
n
: Default value
n
mm
Inch
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5