Oki Teriostar LP-1030 - Printer Engine Menu

86
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Printer Engine Menu
The Printer Engine menu species the operation conditions for the Printer engine.

Power Save Time
The parameter species the maximum idle time before entering the power save
mode.
<Parameter by selecting options>
n
: Default value
15 minutes Enters power save mode if the Printer is not operated for
15 minutes.
30 minutes Enters power save mode if the Printer is not operated for
30 minutes.
n
60 minutes Enters power save mode if the Printer is not operated for
60 minutes.
90 minutes Enters power save mode if the Printer is not operated for
90 minutes.
235 minutes Enters power save mode if the Printer is not operated for
235 minutes.
z
After printing is completed, the Printer enters power save mode automatically when
the data waiting status reaches the set time.
z
The power save mode is canceled automatically when the Printer receives the data.
z
The power save mode is canceled automatically when the Printer is accessed with a
browser or SNMP manager.
z
To cancel the power save mode, press POWER SAVE while the Printer is in the power
save mode.

Top Cut Timer (Roll 1-2)
Sets the data waiting time after which the end of the roll paper is cut automatically.
This is performed when data is received for printing after the data waiting status
has continued for a while.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5