Oki Teriostar LP-1030 - Replacing the Waste Toner Bottle

5656
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Replacing the Waste Toner Bottle
When the waste toner bottle is nearly full with waste toner, the icon below is
displayed on the screen.
After the icon above appeared, about 200 m (7874.02 inches) of printing is possible.
However, prepare a new waste toner bottle in advance to replace the bottle.
When the waste toner bottle is full, the screen below is displayed. Replace the
waste toner bottle following the procedure described below.
TIP

An instruction label to replace waste toner bottle is axed to the side
of the waste toner bottle. Refer to this when replacing the waste toner
bottle.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5