Oki Teriostar LP-1030 - When you have set the wrong language

212
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
When you have set the wrong language
If you have specified the wrong language setting and you cannot operate the
Printer, perform the following solution.
1
Restart the Printer.
2
The Printer starts normally and the standby screen appears. Press
the following buttons consecutively.
Cancel --> . --> Enter --> Cancel
3
The language selection screen appears. Select a language.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5