EasyManua.ls Logo

Oki Teriostar LP-1030 - TIFF Tags

Oki Teriostar LP-1030
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
243
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Command Lists
TIFF Tags
The meaning of the symbols in the table is as follows.
Yes: Indicates commands supported by the Printer.
Partially: Indicates the corresponding functions are partially supported by the Printer.
No: Indicates tags not supported by the Printer.
TIP
The tags supported by the Printer are equivalent to TIFF Revision 4.0.
When data larger than the spool buer size is received, an error message is
displayed on the panel. The data is disregarded.
If the Printer receives any non-supported tags, it ignores them.
Command
Function Supported
Name Hexadecimal
NewSubleType 00FE Species the type of image data. Partially
SubleType 00FF Species the type of image data. Partially
ImageWidth 0100 Species the number of pixels for each image line. Yes
ImageLength 0101 Species the number of image lines. Yes
BitsPerSample 0102 Species the number of bits for each sample. Yes
Compression 0103 Species the compression format. Yes
PhotometricInterpretation 0106 Species the interpretation method for the values in the bitmap. Yes
FillOrder 010A Species the format for storing pixel data in bytes. Yes
StripOsets 0111 Species the oset value for each strip. Yes
Orientation 0112
Species the position of the image origin point, the pixel
forward direction, and the line forward direction.
Yes
SamplesPerPixel 0115 Species the number of samples for each pixel. Yes
RowsPerStrip 0116 Species the number of lines before each strip is compressed. Yes
StripByteCounts 0117 Species the number of bytes after each strip is compressed. Yes
MinSampleValue 0118 Species the minimum sample value. Yes
MaxSampleValue 0119 Species the maximum sample value. Yes
XResolution 011A
Species the number of pixels in each resolution unit in the
line direction.
Yes
YResolution 011B
Species the number of pixels in each resolution unit in the
row direction.
Yes
PlanerCongration 011C Species the format for storing each pixel element. Yes
XPosition 011E Species the oset value for the image X direction. Yes
YPosition 011F Species the oset value for the image Y direction. Yes
T4Options 0124 Species the option information for T4 compression. Partially
ResolutionUnit 0128
Species the physical unit of resolution units in the X
Resolution and Y Resolution tags.
Yes
Color Map 0140 Species the palette color table (RGB). Yes
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5

Table of Contents

Other manuals for Oki Teriostar LP-1030

Related product manuals