242
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Category
Command
Function Supported
Name Hexadecimal
Advanced
Functions
RASTER (MH) 1198 Sets the information for compression raster (MH). Yes
RASTER (MR) 1199 Sets the information for compression raster (MR). Yes
RASTER (MMR) 119A
Sets the information for compression raster
(MMR).
Yes
DIRECT RASTER 3 119B
Sets the information for direct raster (3) (reference
point (mm series)).
Yes
PACKING RASTER 3 119C
Sets the information for packing raster (3)
(reference point (mm series)).
Yes
RASTER (MH-2) 119 D
Sets the information for compression raster (MH-
2) (reference point (mm series)).
Yes
RASTER (MR-2) 119E
Sets the information for compression raster (MR-
2) (reference point (mm series)).
Yes
RASTER (MMR-2) 119F
Sets the information for compression raster
(MMR-2) (reference point (mm series)).
Yes
KANJI DEFINE 11A0 Registers kanji. No
KANJI DELETE 11A1 Deletes kanji. No
SET PAT TERN 1201 Registers a pattern.* Yes
SET HATCH 1202 Registers a hatch. Yes
POLYLINE 1210 Polyline Yes
POLYMAKER 1211 Polymaker Yes
POLYGON SET 1212 Polygon set Yes
CELL ARRAY 1213 Cell array Yes
DIRECT RASTER DATA 1220 Sets the direct raster data. Yes
PACKING RASTER
DATA
1221 Sets the packing raster data. Yes
PIXEL DATA 1222 Pixel data Yes
CONTINUATION
DATA
12FF Data continued from the previous block. Yes
* Even yellow, magenta, and cyan pattern arrays are registered as black pattern arrays. The registered dots are
all expressed in black.
(6/6)
T
Command Lists
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5
To Next Page
Loading...
