Oki Teriostar LP-1030 - Page 241

241
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Command Lists
(5/6)
Category
Command
Function Supported
Name Hexadecimal
Advanced
Functions
WINDOW 1160 Sets the window. Yes
VIEWPORT 1161 Sets the viewport. Yes
FILL AREA STYLE 1162 Sets the internal style of polygons. Yes
FILL AREA BASE
POINT
1163 Sets the pattern and hatch reference point. Yes
WRITE MODE 116 4 Sets delete and write priority or overwrite. Yes
MARKER MODE 1170
Sets the marker attributes (height, coordinate
conversion on/o).
Yes
LINE MODE 1171 Sets the line type attributes (continuous/security). Yes
RASTER ALIGNMENT 118 0
Sets the alignment standard and alignment
direction for the raster.
Yes
RASTER SCALE 1181 Sets the raster scale. Yes
RASTER BYTE MIRROR 1182
Sets the alignment direction (LSB or MSB) for the
rst bit.
Yes
PIXEL ALIGNMENT 1183
Sets the alignment standard and alignment
direction for the pixels.
Yes
RASTER GROUP START 118 4 Species the start of a raster group. Yes
RASTER GROUP END 1185 Species the end of a raster group. Yes
RASTER SCALE 2 118 6 Sets the raster input resolution. Yes
DIRECT RASTER 119 0 Sets the information for direct raster. Yes
PACKING RASTER 1191 Sets the information for packing raster. Yes
PIXEL 1192 Pixels Yes
AREA CLEAR 1193 Sets the white coating range. Yes
RASTER CLIP 1194 Sets the raster clip range. Yes
DIRECT RASTER 2 1195 Sets the information for direct raster (2). Yes
PACKING RASTER 2 119 6 Sets the information for packing raster (2). Yes
PIXEL 2 1197 Pixels 2 Yes
* On hold. Not supported yet.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5