240
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
(4/6)
Category
Command
Function Supported
Name Hexadecimal
Advanced
Functions
LINE WIDTH 1101 Sets the pen line width. Yes
LINE TYPE 1102 Sets the pen line type. Yes
LINE COLOR 1103 Sets the pen line color. Yes
LINE PATTERN 110 4 Registers a line type pattern. Yes
COLOR 1105 Sets the color component.* Yes
CHARACTER HEIGHT 1110 Sets the height of characters (in mm units). Yes
CHARACTER WIDTH 1111
Sets the width of characters (ratio to the
character height).
Yes
CHARACTER SPACING 1112
Sets the interval between characters (ratio to the
character height).
Yes
CHARACTER SLANT 1113 Sets the character direction. Yes
TEXT PATH 1114
Sets the character string direction (up-down or
left-right).
Yes
TEXT ALIGNMENT 1115
Sets the alignment standard for character strings
(with horizontal direction and vertical direction).
Yes
CHARACTER SET 1116 Selects the character set. Yes
KANJI HEIGHT 1120 Sets the height of kanji (in mm units). Yes
KANJI WIDTH 1121 Sets the width of kanji (ratio to the kanji height). Yes
KANJI SPACING 112 2
Sets the interval between kanji (ratio to the kanji
height).
Yes
KANJI SLANT 1123 Sets the slant of kanji. Yes
KANJI PATH 1124
Sets the kanji string direction (up-down or left-
right).
Yes
KANJI ALIGNMENT 1125
Sets the alignment standard for kanji strings (with
horizontal direction and vertical direction).
Yes
CIRCLE 114 0 Draws a complete circle. Yes
ARC 1141 Draws an arc. Yes
TEXT 1142 Draws a character string. Yes
KANJI 1143 Draws kanji. Yes
FILL AREA CIRCLE 1150 Fills complete circles. Yes
FILL AREA FAN 1151 Fills fan shapes. Yes
FILL AREA BOW 1152 Fills bow shapes. Yes
* The maximum values of the 4 parameters (0 to 255) indicating the proportion of yellow, magenta, cyan, and
black are used to determine the gradation in 16 levels. This is expressed as the density of black.
T
Command Lists
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5
To Next Page
Loading...
