Oki Teriostar LP-1030 - T Features

T
Features
23
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
2-stage 2-roll
feed mechanism,
compatible with
long pages
The Printer is equipped with a 2-stage roll feed mechanism
in which two types of roll paper are supported:
- A0 (or 36 inches)
- A1 (or 24 inches)
- A2 (or 18 inches)
- A3 (or 12 inches)
By selecting the roll paper from A0 to A4 depending on
the original documents, the Printer eliminates paper
waste and reduces running costs.
Also, the Printer outputs the long pages up to 10m (393.70
inches). For the maximum printing areas for the Printer,
see the list below.
Paper type Roll Paper
Used
Max. Printing Range
Plain paper/
Recycled paper
A0 roll paper 841×10000mm (33.11×393.70 inches)
A1 roll paper 594×10000mm (23.39×393.70 inches)
A2 roll paper 420×1220mm (16.54×48.03 inches)
A3 roll paper 297×920mm (11.69×36.22 inches)
Tracing paper
(75g (2.65oz)/
m
2
)
A0 roll paper 841×2500mm (33.11×98.43 inches)
A1 roll paper 594×1830mm (23.39×72.05 inches)
A2 roll paper 420×1220mm (16.54×48.03 inches)
A3 roll paper 297×920mm (11.69×36.22 inches)
Tracing paper
(60g (2.11oz)/
m
2
) /
Matte lm
A0 roll paper 841×1220mm (33.111×48.03 inches)
A1 roll paper 594×920mm (23.39×36.22 inches)
A2 roll paper 420×610mm (16.54×24.02 inches)
A3 roll paper 297×4 6 0mm (11.69×18 .11 i n c h es)
TIP

Printing areas do not include the 3 mm (0.12
inches) on front end, 2 mm (0.08 inches) on rear
end, and 2 mm (0.08 inches) on both sides.
A wide
variety of paper
supported
Plain paper, recycled paper, tracing paper (60 g (2.65oz)/
m
2
and 75 g (2.11oz)/m
2
), and lm are available in roll paper
format. Select the paper type depending on your purpose.
High resolution
scanner
unction
MF
An original is scanned and copied at 600 dpi resolution.
Optionally, a color original is also scanned.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5