Oki Teriostar LP-1030 - Available Size Standards

98
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
System Menu

Available Size Standards
Species the paper size standard for the Printer.

Various Paper Series
Species the paper size standard from the following.
A series, ARCH series, ANSI series, 30×42 series, MAP series, DIN series, User Dened
series
A series Rolls A0 (841 mm), A1 (594.5 mm), A2 (420.5 mm),
A3 (297.3 mm)
ARCH series Rolls 36 inches (914 mm), 24 inches (609.6 mm),
18 inches (457.2 mm), 12 inches (304.8 mm)
ANSI series Rolls 34 inches (863.6 mm), 22 inches (558.8 mm),
17 inches (431.8 mm), 11 inches (279.4 mm)
30x42 series Rolls 30 inches (762.0 mm), 15 inches (381.0 mm)
MAP series Rolls 700 mm (27.56 inches), 500 mm (19.69 inches)
DIN series Rolls 707 mm (27.83 inches), 500 mm (19.69 inches)
User Dened series Rolls
<Parameter by selecting options>
n
: Default value
n
O
On
Note

The default value varies depending on the the Printer initialization category.

It is not possible to set all these parameters to O.

When these parameters are changed from On to O, the following related
parameters may also be initialized.
- Size Standard in the Paper menu
- Size of Automatically Supplied Paper in PDL Setting
- Original size standard at copy setting
- Original size standard at submission setting
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5