Oki Teriostar LP-1030 - Page 113

113
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
<Parameter by selecting options>
n
: Default value
Same as Original Size The Printer prints at the original size.
n
Standard Size The Printer prints at the standard size.
Print as A Series This parameter is valid only with A series paper. The Printer
prints on:
- A1 to A4 size paper; and
- Extended A1 to A4 size paper, at which the longer side is
increased by multiples of the longer side's half length.
When the paper is not A series paper, the Printer prints at the
standard size.
Note

The default value varies depending on the Printer initialization category.

With user dened series paper, the Printer always prints at the same size as
the original.
n
Print Copies
Sets the number of copies to print
With HP-GL data, the data setting is prioritized if the number of print copies is
specied in the data.
<Parameter by entering numbers>
1 to 999 Default value = 1, unit in pages
n
Centering
The Printer prints the image centered on the paper.
<Parameter by selecting options>
n
: Default value
n
O The printed image is not centered.
On The printed image is centered.
The image is not centered when the data size is larger than the spool memory
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5