Oki Teriostar LP-1030 - Page 115

115
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
n
Output Tray
The parameter species the size of the printout to be output on the optional tray.
<Parameter by selecting options>
n
: Default value
n
O The Printer outputs all paper to the lower output slot.
Output Tray The Printer outputs the A3 or smaller printout to the tray.
Note

When an optional Folder is connected to the Printer, the Printer outputs all
printouts to the paper outlet slot.
n
Folder
Your printer does not use this parameter. So always set the parameter to Not
Enabled. With Enabled, the printer will not start correctly.
n
Print from End
The parameter activates the function to rotate the image by 180 degrees before
printing.
<Parameter by selecting options>
n
: Default value
n
O The Printer does not rotate the image by 180 degrees
before printing.
On The Printer rotates the image by 180 degrees before
printing.
n
Print Direction
The parameter selects the print direction. This function is eective when:
- The image is printed with a standard size, and
- To print the image, two types of the roll paper installed are available
<Parameter by selecting options>
n
: Default value
n
Short Edge First The printer plots the image with setting its shorter edge
toward the roll paper's lead edge.
Long Edge First The printer plots the image with setting its longer edge
toward the roll paper's lead edge.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5