Oki Teriostar LP-1030 - Page 245

245
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Command Lists
Command Function Default Notes
ascii Sets the le transfer type to ASCII. —
binary
Sets the le transfer type to binary. Be sure to set this
binary command when transferring les.
Image
bye Ends the execution of the ftp command. —
cd Changes the working directory. —
Supported in
anonymous ftp.
cdup Moves the working directory to the parent directory. —
close
Cancels the connection with the Printer, and displays the
ftp prompt.
—
disconnect —
delete (le name)
Deletes unprocessed les already transferred to the
Printer.
—
Not supported in
anonymous ftp.
mdelete (le n)
Deletes multiple unprocessed les already transferred to
the Printer.
—
dir
Deletes spooled le information already transferred to
the Printer.
—
mdir —
ls —
mls —
get Copies 1 le from the Printer to the local host. —
Supported in
anonymous ftp.
mget Copies multiple les from the Printer to the local host. —
mode (mode name) Sets the le transfer mode. stream
open (remote device)
Connects with the Printer. After executing the open
command, enter the user name and password.
—
put (le name) Copies 1 le from the computer to the Printer. —
Not supported in
anonymous ftp.
mput (le name)
Copies 1 le or multiple les from the computer to the
Printer.
—
pwd
Displays the path name of the current directory. The
directory path is always /.
—
quit Ends the execution of the ftp command. —
recv Copies 1 le from the Printer to the local host. —
Supported in
anonymous ftp.
remotehelp (internal
command)
Displays the help information for internal commands
supported by the Printer's ftp server on the screen. (When
internal commands are omitted, displays the internal
command list.)
—
send (le name) Copies 1 le from the computer to the Printer. —
Not supported in
anonymous ftp.
struct (struct name) Sets the le transfer structure. le
sunique
If a le with the same name as the transferred le already
exists, it is stored in the Printer's spool with a dierent
name.
—
Not supported in
anonymous ftp.
type (type name) Sets the le transfer type. Image
user (user name)
Logs in to the Printer's ftp server. After executing the user
command, enter the user name and password.
—
TIP

Up to 10 users can be connected in 3 protocols: ftp (for data transfer), lpr (lpq,
lprm), and xpt.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5