Oki Teriostar LP-1030 - Page 77

77
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
(3) Set the roll
Set the ANSI series roll into the roll paper drawer. For the roll paper installation
method, see page 44.
(4) Set the paper menu
Set Size Standard to ANSI series for the roll paper drawer in which you set the
ANSI series roll (
&
page 84).
(5) Set up the PDL
In the PDL setup for the data transmission port, set Size of Automatically
Supplied Paper to ANSI series (
&
page 111).
(6) Unexpected operation
If the set series does not operate as expected, check the settings again from (1) to (5).
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5