Oki Teriostar LP-1030 - Page 79

79
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
(4) Set the roll
Set the user dened series roll into the roll paper drawer. For the roll paper setting
method, see page 44.
(5) Set the paper menu
Set Size Standard to User Dened series for the roll paper drawer in which you
set the roll (
&
page 84).
(6) Set up the PDL
In the PDL setup for the data transmission port, set Size of Automatically Supplied
Paper to User Dened (
&
page 111).
Also, when performing user dened operations with the printer driver, set Printer
Drive to User Dened (
&
page 126).
(7) Unexpected operation
If the user dened series does not operate as expected, Again check the settings (1)
to (6).
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5