Olivetti d-Copia 3000MF - Low Power Mode and Auto Low Power Mode

Basic Operation
3-4 OPERATION GUIDE
Low Power Mode and Auto Low Power Mode
Low Power Mode
To activate Low Power Mode, press the Energy Saver key. Touch panel
and all indicators on the operation panel will go out to save power except
the Energy Saver, Power, and main power indicators. This status is
referred to as Low Power Mode.
If print data is received during Low Power Mode, the machine automatically
wakes up and starts printing.
Also when fax data arrives while the machine is in Low Power Mode when
using the optional fax, the machine automatically wakes up and starts
printing.
To resume, perform one of the following actions. The machine will be ready
to operate within 10 seconds.
• Press any key on the
operation panel.
• Open the original cover or
the optional document
processor.
• Place originals in the
optional document
processor.
Auto Low Power Mode
Auto Low Power Mode automatically switches the machine into Low Power
Mode if left idle for a preset time. The default preset time is 9 minute.